Pre-Owned Machinery
Integrated Machinery Solution, LLC DOES NOT SELL used machinery. We will act as a Listing Agent. If you would like to list a piece of machinery with us simply click on the button below fill in the form, let us know what dollar amount you would like to net and we will add our Listing fee. When we list your machine and one of our customers wishes to purchase it, they will pay you the entire purchase Price. You in turn will pay IMS the agreed listing fee.
Per-Owned Machinery Available
If you visit this page often please click the "Refresh" button on your tool bar to check for changes
Click the Used Number for Photo if Available
( All machines listed below are available "As Is, Where As" IMS recommends you have a qualified technician inspect any used machinery prior to purchase. See our Service Page for Recommended Technician )
|
Used No. |
Picture | Manufacturer | Machine Type |
Model |
Year of MFG |
Motor size | Phase | Volts | Price |
Inquire to Purchase |
|
| U178 | Ekstrom- Carlson |
Straight Line Rip Saw |
Model E |
3 phase | 460v |
$5,500.00 |
|||||
| U196 |
Acc- Systems |
Drill,
Bore & Dowel Inserter |
H-23 | 1995 | 1.5HP | 3 phase | 230v | $14,445.00 | |||
| U201 |
 |
Ritter |
Horizontal Borer |
R803 | 1997 | 1HPx 2 | 3 phase | 208v | $3,500.00 |
 |
|
| U206 |
 |
Diehl |
Straight Line Rip Saw |
SL50 | ©1970 | 15HP | 3 phase | 230v | $2,300.00 | ||
| U207 | Wood Tek |
3 head
Shaper/Door Machine w/ .75" and 1.25" Spindles |
832-280 | 2000 | 3ea. 5HP | 3 phase | 230v | $880.00 | |||
| U208 | Delta |
20"
Planer w/ Mobile Base |
DC-580 | 5HP | 1 phase | 220v | $3,555.00 | ||||
| U211 |
 |
Timesaver |
37" x 60" Widebelt Sander |
137- 1HD60 |
20HP | 3 phase | $7,500.00 |
 |
|||
| U213 |
 |
Biesse |
Bore, Glue & Dowel Inserter |
FSE | 3 phase | $15,000.00 |
 |
||||
| U214 |
 |
SCMI | 20" Planer | S53 | 3 phase | $4,500.00 |
 |
||||
| U215 |
 |
SCM | Edgebander |
Selecta 12 |
1998 | 3 phase | $24,500.00 |
 |
|||
| U222 | Graco |
30:1, 1.6gal, fine finish, assisted air unit Paint Sprayer w/ 2 25' hoses. (wall mount) |
Merkur 030.050 |
2005 | $1,400.00 |
 |
|||||
| U223 | Holz-her | Edgebander | 1403 | 1982 | 3 phase | 230v | $4,840.00 |
 |
|||
| U235 | Apollo |
HVLP 4 Stage Turbine w/Graco Gun and Pressure Pot |
1100 | 2000 | 1.5hp | 1ph | 120v | $675.00 |
 |
||
| U238 |
Clarke American Sanders |
3 Disc Floor Sander |
3DS | 2004 | 3HP | 1 ph | $4,700.00 | ||||
| U239 | Grizzley |
12" Table Saw w/add on Slider |
65959 | 1998 | 5HP | 1 ph | 230v | $1,780.00 | |||
| U240 | Ritter | Case Clamp | R500 | 1995 | 1 ph | Select | $3,350.00 | ||||
| U241 |
 |
Holz-Her | Edgebander | 1437 | 1984 | 3 ph | 208 v | $6,350.00 |
 |
||
| U245 | Sullair |
Screw Compressor |
ES 8 | 1999 | 25hp | 3 ph | 460v | $3,850.00 |
 |
||
| U248 |
 |
Murphy Rodgers |
60"x70" Downdraft Table w/10" outlet |
n/a | 1993 | n/a | n/a | n/a | $1,150.00 |
 |
|
| U250 |
 |
Holz-Her |
Edgebander (Cartridge applicator, 4 roller pressure section, end trim, top/bottom trim, open station, shaper station) |
1443C | 1994 | Multiple | 3 ph | 230v | $17,250.00 |
 |
|
| U251 |
 |
Timesaver |
37" Single Head Wide Belt Sander |
137 HP75 |
1994 | 20 HP | 3ph | 480v | $8,050.00 |
 |
|
| U253 |
 |
Delta |
10" Unisaw w/96" Biesemeyer Fence |
n/a | 1993 | n/a | n/a | n/a | $920.00 |
 |
|
| U255 |
 |
Ritter |
13 Spindle Line Borer |
R113 | 94-95 | 1 hp | 1ph | 110v | $1,380.00 |
 |
|
| U256 |
 |
Ritter |
Edge Sander |
R700 | 94-95 | n/a | n/a | n/a | $1,150.00 |
 |
|
| U257 |
 |
Larick |
Profile Edge Sander w/Delta Power Feeder |
360V | n/a | n/a | n/a | n/a | $1,725.00 |
 |
|
| U261 |
 |
Yale |
Stand-Up Rechargeable Forklift |
n/a | n/a | n/a | 3 ph chrg |
230v chrg |
Make Offer |
 |
|
| U265 | Tri State |
Dry Filter Spray Booth |
Tri-Matic | 2005 | 2hp | 3 ph | 208v | $22,250.00 |
 |
||
| U267 |
_small.JPG) |
Norway | 24" Planer | Unkown | approx 1980 | 3 ph | 230v | Make Offer |
 |
||
| U269 |
.jpg) |
CR Onsrud |
Inverted Pin Router |
24210 | 10HP | 3ph |
240/ 440V |
$8,350.00 |
 |
||
| U271 |
_small.jpg) |
Evans |
Overarm Router |
2480 | 1997 | 3ph | 208v | $5.500 |
 |
||
| U275 |
 |
Grizzly |
37" Widebelt Sander |
G9965 | 10HP | 1ph | 208v | $3,850.00 |
 |
||
| U279 |
 |
Oliver |
25" Widebelt Sander |
5370 | 2006 | 15HP | 3ph | 208v | $6,325.00 |
 |
|
| U280 |
 |
Martin |
Sliding Table Saw |
T-60 Classic | 2006 | 7.5 HP | 3ph | 230v | $14,500.00 |
 |
|
| U281 |
 |
Powermatic | Shaper | TS-29 | 2002 | 7.5HP | 3ph | 230v | $4,400.00 |
 |
|
| U282 |
 |
Graco |
9'x17' Spray Booth |
? | 1997 | 1ph | 208v | $3,300.00 |
 |
||
| U283 |
 |
Air Filtration Systems |
20" Main Line Cyclone with RAL / Blower & Bag house |
1998 | 25 HP | 3ph | 230v | $16,500.00 |
 |
||
| U284 |
|
Murphy Rodgers | 12" Main Line | MRZ-12 | 2005 |
10 HP |
3ph |
208/ 230/ 460 |
$2,999.00 |
 |
|
| U285 |
 |
Silver | 6 Head 9" x 6" Moulder | 6023AH |
1999 very low hours |
70HP combine spindle total | 3ph |
480 /230v |
$18,999.00 |
 |
|
| Please call us at 303-948-9085 or e-mail us at Postmaster@IntegratedMachinery.net for more information. | |||||||||||
